If it is in a normal use environment, it is not complicated to install and debug the wifi jammer. Generally, you only need to turn on the host switch after powering on the device and use the mobile phone to observe the work of the mobile phone at different positions from the shielding device. If it is in a conventional use environment It is not complicated to install and debug the wifi signal jammer. Generally, you only need to turn on the host switch after powering on the device and use the mobile phone to observe the working status of the mobile phone at different positions from the wifi frequency jammer, and then you can intuitively judge the shielding effect. However, once you encounter a complex use environment, you need to use a spectrum analyzer to help you when you need to analyze the signal or formulate an adjustment plan on the site importance!
The complex usage environments we are talking about here can be roughly divided into two categories:
1. In the field environment, the base station signals transmitted from the mobile phone base station have various formats, and the signal strength varies greatly, which leads to the shielding effect of the wifi blocker for some signals. At this time, if there is a spectrum analyzer on-site, the technician can quickly find out which standard base station signal is stronger in such a live environment through signal retrieval, or analyze and judge which frequency bands are shielded signals that have not been done. to complete signal suppression. Feeding this analysis result back to the manufacturer of the wifi jammer device will help to quickly find a solution to the unsatisfactory wifi signal blocker.
2. In the field environment, the layout of the building is complex, there are many partitions or obstacles, and the signal coverage of the 5g wifi jammer is uneven. In such a field environment, if there is a spectrum analyzer, you can receive the shielded signal of the wifi jammer kit through the receiving antenna and display it on the spectrum analyzer, and then observe the amplitude of the waveform in each frequency band or read the signal. The value of the strength can accurately grasp the signal coverage strength of the shielded signal in each area so that the desired signal shielding effect can be obtained in the corresponding area by further adjusting the installation position of the wifi shield or the direction of the antenna. The operating state can be very intuitive to judge the shielding effect. However, once you encounter a complex use environment, you need to use a spectrum analyzer to help when you need to analyze the signal on-site or formulate an adjustment plan. At the same time, it can also fully reflect the installation height of the spectrum analyzer for the wireless wifi bluetooth jammer importance!
