With the increasing popularity of cellular phones, many users will agree that the convenience of a built-in wifi jammer will be greatly appreciated. The device allows you to connect to the router without having to enter password protection every time. The great thing about a jammer is that it doesn't interfere with the security settings on your phone. You can still view and send text messages in the middle of nowhere. In this article, I want to show you how to install and use a wifi signal jammer using.
1. Take out the wifi blocker host from the box;
2. Screw the antennas into their corresponding antenna bases according to the letters and tighten them, otherwise, it will be invalid;
3. Hang the wifi jammer device on the wall or erect it in a corresponding position, and the installation height is 1-2 meters;
4. Turn on the power switch, and the work indicator on the power supply is on, indicating that it starts to work. If it is a style with a built-in lithium battery, please ensure that it is fully charged before use.
Precautions for the use of WiFi jammers
1. The antenna must be installed according to the corresponding mark on the host, and then connected to the power of the host.
2. The effective coverage of the wifi jammer device is a circular area centered on the protective cover, so when using the protective cover, you should pay attention to the correct choice of placement position to avoid dead ends of protection; if it is a directional antenna, you can use it according to the antenna standard sector. horn. Adjust the alignment to the target orientation.
3. The signal jammer should be placed in a well-ventilated place, try to avoid the shielding of large objects, and avoid strong electromagnetic sources of strong heat sources, so as to ensure the shielding effect and long-term stable operation.
4. When shielding work, do not stack other items on it and remove the antenna, so as not to affect the shielding effect and damage the machine.
5. When the wifi signal blocker is not in use, the power supply should be cut off in time, so as not to affect the normal use of the mobile phone.
6. When using the shielding device outdoors, pay attention to dustproof and waterproofing. Please keep away from corrosive gases and liquids, and do a good job of dustproof and moisture-proof, so as not to accelerate the aging of the internal parts of the equipment
7. When the area of the site is larger than the effective shielding range, it is recommended to use multiple isolators for cellular installation to ensure the shielding effect.
8. Since the power supply and antenna are matched with the host, they are debugged one-to-one when they leave the factory. Please try not to use them interchangeably to ensure good results.
