The wifi jammer scans from the low-end frequency of the forward channel to the high-end frequency at a certain speed during the working process. The scanning speed can cause garbled interference in the message signal received by the mobile phone, and the mobile phone cannot detect the normal data sent from the router, so the mobile phone cannot establish a connection with the router. The mobile phone is manifested as searching the network, no signal on the mobile phone, no service system, etc.
1. The parameter indicators of all devices will change with the change in temperature. If the temperature is too high, the stability of the device will be affected. For example, when a shielded area has signals on both sides of the interference frequency band, the shielding is usually effective. When the temperature rises, the frequency occurs. If the deviation is large, the interference frequency deviates from the original working frequency, which makes the original shielding lose its effect or causes the shielding effect to be good or bad.
2. The temperature affects the service life of the equipment. The usual rule is that the service life is inversely proportional to the square of the temperature increase.
For example, when the chip temperature of a device is 65°C, the mean time between failures is 100,000 hours; when the temperature rises to 115°C, the mean time between failures is 30,000 hours.
Jammer mart specializes in producing all kinds of wifi signal jammer equipment. To learn more about jammers, you can continue reading.
